Select your language

Wiring for Megasquirt Competición

Sales price without VAT: 99,00 €
Description

 

3.5 meter cable crimped on connectors for Megasquirt competition, includes shielded cables for crankshaft and camshaft sensors, DB9 1.2m cable for connection to PC (USB to RS232 adapter not included). Special automotive wiring resistant to gasoline, oil and acids, its temperature range according to ISO6722 is -40 ° C to + 105 ° C continuous. Wiring manufactured with thin wall coating according to DIN 72551, but maintaining the same section of copper, allows thinner wiring harnesses. It meets the standards of many automotive manufacturers, Bosch, BMW, Fiat, VW, Ford MAN. 

Connector 20 pins:

  • Pin 1 Red, 5v TPS power supply.
  • Pin 2 Green / black, TPS, air temperature sensor and motor temperature sensor, mass return.
  • Pin 3 Pink, double map of fuel and ignition or other uses.
  • Pin 4 and 5 shielded crankshaft sensor cable.
  • Pin 6 and 7 shielded cam sensor cable.
  • Pin 8 Brown, motor temperature sensor.
  • Pin 9 DB9 communication with PC (1.2 meters).
  • Pin 10 Red / white, + 12V of supply to the ECU.
  • Pin 11 and 12 Black, masses to the motor block, same point as the battery.
  • 13 Pin, White Launch Control and Cut-Off.
  • Pin 14 Green, tacometer output.
  • Pin 15 Yellow, wideband probe signal.
  • Pin 16 Gray / red, petrol pump relay.
  • Pin 17 Violet, TPS signal.
  • Pin 18 Orange, air temperature sensor.
  • Pin 19 and 20, DB9 communication with PC (1.2 meters).

12-pin connector:

  • Pin 1 and 2 Black, masses to the motor block, same point as the battery.
  • Pin 3 Blue, Injection Output 1, Cylinder 1 with ignition order 1-3-4-2.
  • Pin 4 Blue / black, Injection output 2, cylinder 3 with ignition order 1-3-4-2.
  • Pin 5 Blue / red, injection output 3, cylinder 4 with ignition order 1-3-4-2.
  • Pin 6 Blue white, injection output 4, cylinder 2 with ignition order 1-3-4-2 ..
  • Pin 7 Gray, ignition output 4, ignition coil cylinder 2 with ignition order 1-3-4-2.
  • Pin 8 Red / black, ignition output 3, ignition coil cylinder 4 with ignition order 1-3-4-2.
  • Pin 9 Yellow / black, ignition output 2, ignition coil cylinder 3 with ignition order 1-3-4-2.
  • Pin 10 Gray / black, ignition output 1, ignition coil cylinder 1 with ignition order 1-3-4-2.
  • Pin 11 Violet / Black, Boost control Solenoid.
  • Pin 12 White / black, idle valve.