Mitsubishi EVO 4 a 9 piston forged Wiseco E85 Series HD2 (gas ported) CR = 10,5

Piston forged Wiseco E85 Series HD2, gas ported, for Mitsubishi EVO 4 a 9. Engine code 4G63 GEN 2.

Characteristics:

• Compression ratio 10,5.
• Diameter of the pin 22mm.
• Diameter of the piston: 85 mm, 85,25, 85,5, 86 mm, 86,5 mm, 86,75 mm, 87 mm.
• Weight 333 to 352 gr.
• PIN with 5.72 mm wall
• Wiseco AmorGlide coating on piston skirt (included on all Wiseco pistons).
• Wiseco AmorPlating coating in the crown, in the segment slots, in the pin hole, opcional. 
• Asymetrical piston.
• It may be necessary to modify the oil injectors in the lower part of the cylinder.

All piston KITS include the pistons, piston rings, pins, and all necessary hardware to install on the engine in which they are to be used.

Delivery time may vary depending on stock, please inquire. 

Wiseco is a world leader in the manufacture of forged pistons. They manufacture their own forging tools and all their forged pistons in the USA to give exceptional quality in their products. Wiseco stands out in its machining and finishing, as for example the rounding of all the edges that can create hot spots and auto ignition at high loads and pressures in the head of the piston. Wiseco pistons have valve recesses in the piston head where necessary.

Extreme race conditions demand strength and hardness that only the forged pistons can offer. Compared to parts castings, forged parts are stronger and more durable, and will withstand the abuse that high performance motor sports applications require. Most castings are fragile and tend to fail catastrophically when the elastic limit of the material is exceeded. Forged parts have superior mechanical properties and resistance to impact and fatigue.
Wiseco Forged Pistons offer a new skirt coating called ArmorGlide ™, which is the result of testing and development through rigorous test bench programs in the Wiseco lab. The result is the ultimate in skirt lining, lubrication, and technology. Everything works together to minimize friction, maximize power, and provide better wear resistance. Not only is it a high-tech lubricant that reduces friction, it also allows the piston to fit more tightly inside the liner, allowing better segment sealing and noise reduction.

Wiseco ArmorPlating is applied on some RC series and sport series compact pistons. This high performance coating is applied to the piston crown, segment grooves and the piston pin hole, these parts are darker to the naked eye by the coating. The cladding of the dome helps to protect the piston from damage caused by detonation, and actually hardens over time from the heat caused by the combustion. This coating also applies to the segment groove and helps eliminate micro-soldering from the segment, reducing groove wear and improving sealing. The liner in the piston pin hole reduces wear and friction.